Sonicview 360 Walkthrough

[Gugi47]

Sonicview 360 Walkthrough

Setup for Sonicview 360 Elite
Loading

Download and unzip file and put it on your USB stick
Insert the USB drive into the front USB port of Sonicview 360 Elite
Press Menu; Choose PVR; Choose USB Drives; Press OK; Highlight file and press red button to download.
After the receiver downloads and reboots take your USB out, turn off from back, count to five and turn back on.

Set Time, Locals, Autoroll, Parental Control

Press Menu; Choose System Settings; Choose Time Settings; Choose your time zone exit.
Press Menu; Choose System Settings; Choose User Options; Set all to ON Choose your local and exit.
Press Menu; Choose System Settings; Choose Parental Conrol; 0000; Set all to OFF, and ACC to Disable.

Scanning

Press Menu; Choose Installation; Choose Dish Setting
Start with Tuner 1

******** 7
OCS DP
11250
12224 or 12239 TP
Port 1

Press the red button to scan the satellite save when done

******** 8,10
OCS DP
11250
12224 TP
Port 2

Press the red button to scan the satellite save when done

Tuner 2
If you used two wires from your dish choose separate
If you have one wire from dish and used the loop through (can only record channel and watch channel on same TP ) Choose Loop Through

Scan as above

Exit out
wait for keys to Roll