No sounds..

[jabrri]

Newbie : Just got everthing loaded and scanned the only thing that is not working is the sound. I am using a 360 elite connected to the tv with a s-video cable. Is there a setting or file that I have over looked or just ignorant on how the cable box to the tv. I have checked all the basics and all is ok.

The only file I loaded into the box was the latest charliefix9/28/08.

I'm using a Dp 500 pro with twin lnb going into a dpp seperater then up to the tv.

I hope that I have supplied enough info for some help.

[ekway]

you have to run an audio cable from the box to the tv also. Red and White from box to Red and white on tv.

[smack]

You may need to turn power off,then back on. This is done via the rear rocker switch(not the front button,which is actually a "standby-mode" button). On/off via rear switch is usually referred to as a reboot.
Also,obviously,check the tv and receiver remote for volume adjust.