tried puff...now knight rider light's

[dexmike1]

tried puff...now knight rider light's.

so now.....
i used knight rider fix, then flashed original pansat bin.
i then "booted" boot60. then "flashed" puff 254.
now the original pansat2500a is back to knight rider lights.

thinking of this process next...
use knight rider fix,
flash with original bin,
convert to 2700,
convert back to 2500 with boot60,
flash with puff 254.

any idea's would be greatly appreciated,
dex

[fifties]

Your mistake was in not loading 253 after boot 60, and before 254.

So, once you have restored it, load boot 60, then 253, then 254, and do not shut the receiver off between any of these flashes.

[stevega]

CS_254T_puff or jvvh254 bin

1.First: Use the 2700 to 2500 to load boot 60 bin Click boot only with box (ON)
hit download you load boot60 reciever will not come to ON.
You will have rolling Knight Rider Lights ( - - - -)

2.DO NOT turn reciever OFF. Leave it with - - - - rolling.

3.Open BL_1.4 , 2500 to 2700 and CS_253T_PUFF_(640Kb) BIN and hit Download or write

Reciever will reboot to - - - - and pause ON - for 2 minutes.

4.AGAIN DO NOT TURN RECIEVER OFF.It will reboot to P U F F _ P U F F pause on F for 30 or so seconds then come ON.

5. Load CS_254T_PUFF_Serial_Lightning (448kb)

6.Reboot reciever switch in back off/on and at first "P" hit download or write .
Wait for complete and boot up before turnning off box