Ace Rimmer
09-14-2007, 08:01 PM
Revised: Update new Bin on Coolsat 8000 after the initial setup so it will Autoroll
To update Coolsat 8000 properly after the initial setup so it will Autoroll
Each one of the files in the Blue links must be unzipped and saved to a folder. The unzipped files are the active files the Loader requires.
With the reciever shut off from the rear power switch connected to your computer to the reciever with a null cable.
Open The loader;
Coolsat new loader CSUpgrade_v3.01
http://www.dssgeeks.com/forums/coolsat-8000-loader-t863/index.html
Click on Browse and find the unzipped clear software Bin file. Double click on it.
http://www.dssgeeks.com/forums/cs8000hd-clean-software-t2083/index.html
Once you see the file in the window,click "Start" turn the reciever on from the rear and wait for the file to download and complete. Once completed, turn the reciever off from the rear.
Click on Browse and find the unzipped original Factory Flash HD_h600c146-11138A.sgn. Double click on it
http://www.dssgeeks.com/forums/coolsat-8000-factory-t764/index.html
Once you see the file in the window,click "Start" turn the reciever on from the rear and wait for the file to download and complete. Once complete, turn the reciever off from the rear.
Click on Browse and find the unzipped current Active CS8000-Bin-11174F.sgn. Double click on it.or current bin
http://www.dssgeeks.com/forums/cs8000-11174f-09-t12802/index.html
Once you see the file in the window,click "Start" turn the reciever on from the rear and wait for the file to download and complete, turn the reciever off from the rear.
Unplug the null cable from the rear of the reciever and unplug from the wall. Hook the reciever back up to the TV. Power the reciever back on from the rear switch and turn your TV on.WAIT for picture.Watch TV. Make sure the autoroll is on and your settings are correct.
To update Coolsat 8000 properly after the initial setup so it will Autoroll
Each one of the files in the Blue links must be unzipped and saved to a folder. The unzipped files are the active files the Loader requires.
With the reciever shut off from the rear power switch connected to your computer to the reciever with a null cable.
Open The loader;
Coolsat new loader CSUpgrade_v3.01
http://www.dssgeeks.com/forums/coolsat-8000-loader-t863/index.html
Click on Browse and find the unzipped clear software Bin file. Double click on it.
http://www.dssgeeks.com/forums/cs8000hd-clean-software-t2083/index.html
Once you see the file in the window,click "Start" turn the reciever on from the rear and wait for the file to download and complete. Once completed, turn the reciever off from the rear.
Click on Browse and find the unzipped original Factory Flash HD_h600c146-11138A.sgn. Double click on it
http://www.dssgeeks.com/forums/coolsat-8000-factory-t764/index.html
Once you see the file in the window,click "Start" turn the reciever on from the rear and wait for the file to download and complete. Once complete, turn the reciever off from the rear.
Click on Browse and find the unzipped current Active CS8000-Bin-11174F.sgn. Double click on it.or current bin
http://www.dssgeeks.com/forums/cs8000-11174f-09-t12802/index.html
Once you see the file in the window,click "Start" turn the reciever on from the rear and wait for the file to download and complete, turn the reciever off from the rear.
Unplug the null cable from the rear of the reciever and unplug from the wall. Hook the reciever back up to the TV. Power the reciever back on from the rear switch and turn your TV on.WAIT for picture.Watch TV. Make sure the autoroll is on and your settings are correct.