zippo1guy
06-25-2009, 06:19 PM
this is a c&p from Outlawbikes on another site.
I was having problems with the webloader and r232 cables downloading 151, and this worked the first time!
If you are having issues using the Webloader, give this a try.....
Use the Channel Editor program (by Dalek) for the Solaris and Phoenix:
1. Power on your Solaris/Phoenix and turn to channel 100.
2. Open the Channel Editor Program
3. Select the "Transfers" Tab.
4. Select "Send File to Nfusion".
5. Use "admin" for username.
6. Use "0000" (all zeros) for Password.
7. Make sure the IP address is correct for the Nfusion you are wanting to transfer the file to.
8. Browse for the (unzipped bin. file) file location on your computer or flash stick, etc.
9. Select the latest file release and select open (or double click on it).
10. Now select "Load File" button in bottom right corner. This may take several tries to allow the progress bar to fill to 100%.
I was having problems with the webloader and r232 cables downloading 151, and this worked the first time!
If you are having issues using the Webloader, give this a try.....
Use the Channel Editor program (by Dalek) for the Solaris and Phoenix:
1. Power on your Solaris/Phoenix and turn to channel 100.
2. Open the Channel Editor Program
3. Select the "Transfers" Tab.
4. Select "Send File to Nfusion".
5. Use "admin" for username.
6. Use "0000" (all zeros) for Password.
7. Make sure the IP address is correct for the Nfusion you are wanting to transfer the file to.
8. Browse for the (unzipped bin. file) file location on your computer or flash stick, etc.
9. Select the latest file release and select open (or double click on it).
10. Now select "Load File" button in bottom right corner. This may take several tries to allow the progress bar to fill to 100%.