wrecked it...

[kooze]

Hello my friends , I just bought a Nfusion , I put in the factory bin and the 1.44 through my computer 9 pin cable that was sent with the machine.
I put it on my TV and it does not turb on only the red lite stays on.
I downloaded and waited till it was all complete. Can anyone tell me what i have to do to fix this ,Thankyou .........Al

[Mr.Hyde]

setup ur sats and channels

[kooze]

I got my sats and channels . but i cannot still get the shows , i have the auto roll on and good quality and the newest bin . ?????? can you help me , thankyou again....Al

[Mr.Hyde]

u have the internet hooked up?? cable into stb
stb- internet-network = on-auto update = on- proxey off

[ballbreaker]

What windows are you using ?
are you using the 25 foot cable or the wireless internet conection ?

[kooze]

I am trying to hook up a wire less connection ,i have a linksys wrt 150n , and i am using windows xp , i am not a electronic wiz but eventually comes together with the help i get from you fellows, i did not know you have to be hooked up to the enternet to get the tv going.....thankyou....Al

[ballbreaker]

OK , one thing with the Fusion . Lotta reading to get her set up . Have you tried this yet ?
http://www.dssgeeks.com/forums/too-cubes-nfusion-t23070/index.html

[Mr.Hyde]

I am trying to hook up a wire less connection ,i have a linksys wrt 150n , and i am using windows xp , i am not a electronic wiz but eventually comes together with the help i get from you fellows, i did not know you have to be hooked up to the enternet to get the tv going.....thankyou....Al

run a cable from wirless or u have to buy a wireless adapter for stb

[kooze]

i have tried all of the above in the files sec but nuttin seem to get thjrough to my machine , it is not connecting for some feason. i am still trying same stuff over ond over...thankyou much......AL

[Mr.Hyde]

u have a internet cable running to the stb???

[NOKIA™]

without internet connection ... ur Nfusion won't open up channels...!

either hook it with a net cable ...

or get a wireless adapter to get internet connection...

other than that... theres nothing to be done!

[kooze]

i have the netgear , one in the tv room and the other by my computer pluged into my Linksys. This is supposed to work , but i am having problems getting it to comunicate with my Nfusion.....thankyou for the comback............Al

[Mr.Hyde]

i have the netgear , one in the tv room and the other by my computer pluged into my Linksys. This is supposed to work , but i am having problems getting it to comunicate with my Nfusion.....thankyou for the comback............Al

the netgear or linksys??
u need a cable into the nfusion ??
go to stb - internet- network (on) check network -to see ip address
make sure proxy is off

[NOKIA™]

post the message that comes up when u hit SW version on ur nfusion

[kooze]

I have the netgear that came with the machine so i can go wireless , I have tried to get it going but not secceeded. do i need a program in my computer to get this to transfer, i have window xp. somestuff is hard to understand but i am trying i got a grade 8 diploma in 1963 , no electronic courses than....Thankyou fror your kindness............Al

[kooze]

the s/w says do not turn off the set.........failure to connect server..........retry next time, i am missing somthing ???? thankyou....Al

[skybliss]

the s/w says do not turn off the set.........failure to connect server..........retry next time, i am missing somthing ???? thankyou....Al
Kooze, here is a link for u to read it, it was happy ended just yesterday
cant connect to internet (http://www.dssgeeks.com/forums/showthread.php?t=29522) (http://www.dssgeeks.com/forums/images/styles/generic_bluev1.0/misc/multipage.gif 1 (http://www.dssgeeks.com/forums/cant-connect-internet-t29522/index.html) 2 (http://www.dssgeeks.com/forums/cant-connect-internet-t29522/index2.html) 3 (http://www.dssgeeks.com/forums/cant-connect-internet-t29522/index3.html) ... Last Page (http://www.dssgeeks.com/forums/showthread.php?t=29522&page=10)) mikegoffredo
Go to second page of the forum posts.
Good luck to ya...

[Web Wizard]

OK this is not really rocket sceince and this is posted over and over again but here we go man!

1- turn off everything (Nfusion using back switch, router, computer)

2- you need a cable to go from netgear to STB and another cable to go from netgear to router

3- turn on computer and router, verify you have internet connection

4- turn on nfusion

5- menu/internet/network connection = on

6- network information should show IP info .. DHCP/STATIC should be set to DHCP

other settings to turn off until you get box running and know what they do which will come with familiarity and reading are

manu/internet/proxy connection = off
menu/ user settings/dolby digital, DN auto, Bev auto, Emulator= OFF

REBOOT STB again using back switch and providing your disecs are configured right and you have already scanned in channels you should have tv

[Web Wizard]

Kooze, here is a link for u to read it, it was happy ended just yesterday
cant connect to internet (http://www.dssgeeks.com/forums/showthread.php?t=29522) (http://www.dssgeeks.com/forums/images/styles/generic_bluev1.0/misc/multipage.gif 1 (http://www.dssgeeks.com/forums/cant-connect-internet-t29522/index.html) 2 (http://www.dssgeeks.com/forums/cant-connect-internet-t29522/index2.html) 3 (http://www.dssgeeks.com/forums/cant-connect-internet-t29522/index3.html) ... Last Page (http://www.dssgeeks.com/forums/showthread.php?t=29522&page=10)) mikegoffredo
Go to second page of the forum posts.
Good luck to ya...

no sense reading that jumbled crap as it is so messed up it would confuse a rocket scientist at this point....

setting up any FTA is usually no more than 3 or 4 steps. With the Nfusion it is configuring the network settings themselves that is causing issues. Nothing really difficult about it but if you are not computer literate and have some networking experience then you are going to have problems with this box. As I have been saying all along the Nfusion is not a box for the free TVer

[skybliss]

Lets hope he will help himself after ur clear guidance, web...TNX.

[Mr.Hyde]

Lets hope he will help himself after ur clear guidance, web...TNX.

does he have the wireless adapter for the nfusion stb?
does he understand he needs one if he is to go wireless??????:noclue: :noclue:

[skybliss]

Hyde, he says he got netgear with the stb, he just not sure how to set it up, as i see...

[Mr.Hyde]

Hyde, he says he got netgear with the stb, he just not sure how to set it up, as i see...

netgear is not a wireless router??

[skybliss]

netgear is not a wireless router??
Hyde, it's his words: I also think he must be under 70 years old, so what???
kooze
I have the netgear that came with the machine so i can go wireless , I have tried to get it going but not secceeded. do i need a program in my computer to get this to transfer, i have window xp. somestuff is hard to understand but i am trying i got a grade 8 diploma in 1963 , no electronic courses than....Thankyou fror your kindness............Al

[JTmustang302]

what sats r u pointed at? what dish, lnb, switch are you using? has this setup worked on a different receiver?

i think to help the most we need to know all the the settings entered into the machine.

hit menu -> antenna settings -> list these

hit menu -> internet -> list these

hit menu -> user settings -> list these

hit menu -> settings -> list these

[v-rod]

I think You should bypass the net gear for now and run a cable from your router to your receiver to reduce a variable, Get the receiver working then play with the net gear to go wireless ;)

[JTmustang302]

I think You should bypass the net gear for now and run a cable from your router to your receiver to reduce a variable, Get the receiver working then play with the net gear to go wireless ;)

i agree a hardwire connection is the easiest way to connect.

do that then lets troubleshoot all the settings.

[kooze]

sorry 4 not gettin back ,had problems with my new linksys ,did the poweroff on my comp. and turned off the power on my nfusion , waited a couple minites and turned my comp. back on checked to see if i had internet and no i did not . i started 4 mabe 5 times hooking up my linksys and it said cannot connect to the internet, so i took it back to future shop and got another, same thing i cannot get the inter net with this linksys and i did have it before . I will figure it out .....thanks alot for all your help very much appreacite all of it....Thankyou again............Al

[JTmustang302]

if your typing here the internet works on the computer.

we need to know the ip adress on your computer.

DO THIS - click start -> click run -> type cmd and press ok -> type ipconfig /all -> POST here what your IP adress is

eg.192.168.1.108 <- an ip a router would give
eg. 67.42.25.16 <- an ip from an internet provider

after you post your computer IP and we'll get your nfusion up and running.

[Web Wizard]

DO NOT POST YOUR IP HERE!!!! Closin gthis thread because it is ridiculous info is posted any more exchange just clouds the issues anyway