How to revive a Dead 600S receiver

[musky]

How to revive a Dead 600S receiver

If you are having a Green Screen and when you press the Menu button it keeps changing the Green to Grey and back to Green then you can restore it in the following way.

Use the 600S Factory Files

1. Pick 1.05 Loader (not the 1.04 Loader).
2. Make sure you are on the right Com Port.
3. Use a NULL Modem cable.
4. While holding the front Power button switch ON the rear switch.
5. Now you should see BOOT on the front panel of your receiver.
6. Go to the file folder shown on your loader and pick 'CX KroundV 1.13_Captive Works-25-5-2006' File.
7. Now click on Start and wait till you see End on your receiver.
8. Shut off the receiver and Switch it on with your rear switch and wait till it shows 0000 on the front panel.
9. Now press the front Power switch and you should see --:-- on the panel.
10. Now click on the file folder on the loader and select 'CX LoaderV2.50' file. and click on Start and wait till
you see End on the panel.
11. Now take the receiver to your TV and connect it and switch ON the rear switch.
12. VIOLA - you have the Captive Works Menu back again.
13. Now do a Factory reset - ALL. Select English, Time. Exit.
14. Go back to your Computer and load the Latest bin the usual way using the 1.05 Loader.
15. Do another Factory reset. Put back your settings and watch TV.

[benny1]

if it is a 600s it dead all the 600s i know of are gone they last about 3yr.

[rosadorod]

Originally Posted by musky

How to revive a Dead 600S receiver

If you are having a Green Screen and when you press the Menu button it keeps changing the Green to Grey and back to Green then you can restore it in the following way.

Use the 600S Factory Files

1. Pick 1.05 Loader (not the 1.04 Loader).
2. Make sure you are on the right Com Port.
3. Use a NULL Modem cable.
4. While holding the front Power button switch ON the rear switch.
5. Now you should see BOOT on the front panel of your receiver.
6. Go to the file folder shown on your loader and pick 'CX KroundV 1.13_Captive Works-25-5-2006' File.
7. Now click on Start and wait till you see End on your receiver.
8. Shut off the receiver and Switch it on with your rear switch and wait till it shows 0000 on the front panel.
9. Now press the front Power switch and you should see --:-- on the panel.
10. Now click on the file folder on the loader and select 'CX LoaderV2.50' file. and click on Start and wait till
you see End on the panel.
11. Now take the receiver to your TV and connect it and switch ON the rear switch.
12. VIOLA - you have the Captive Works Menu back again.
13. Now do a Factory reset - ALL. Select English, Time. Exit.
14. Go back to your Computer and load the Latest bin the usual way using the 1.05 Loader.
15. Do another Factory reset. Put back your settings and watch TV.

this is 650s forum